Cable and Hose protectors allow for uninterrupted construction or maintenance whilst leaving a route open to pedestrians and transport. The plastic ramps offer channels in various sizes, depending on the hose or cable diameter being housed.

Cable and Hose protectors – Large

large cable protector ramp

Large Cable/Hose Protection Ramps –  Drive over cables, hoses and pipes without causing them damage.

  • Easily and quickly deployed.
  • Three top loading channels for cables/hoses.
  • Anti-slip hinged top panel.
  • Interlocking design feature.
  • Strong robust construction.
  • Suitable for use with HGV’s.

Applications:

Construction sites, distribution depots, emergency works, road works, etc.

Specifications:

       Centre Section

  • Size: 960 mm L x 600 mm W x 75 mm H
  • Body Material: Hard rubber
  • Cover Material: Polypropylene
  • Body Colour: Black
  • Cover Colour: Yellow
NEW: Cross Over Section
  • Size: 597 L x 740 mm W x 75 mm H
  • Body Material: Hard rubber
  • Cover Material: Polypropylene
  • Body Colour: Black
  • Cover Colour: Yellow

       45-Degree Angle

  • Size: 500/200mmL x 600mmW x 75mmH
  • Body Material: Hard rubber
  • Cover Material: Polypropylene
  • Body Colour: Black
  • Cover Colour: Yellow

       End Section

  • Size: 283 mm L x 600 mm W x 75 mm H
  • Channels: 2 x 68 mm, 1 x 55 mm
  • Material: Hard rubber
  • Colour: Black

large cable ramp schematic

We recommend that appropriate warning signs are used with this product. Recommended speed 5mph.

CodeDesignColourWidth

(mm)

LengthDrive-over

height (mm)

279.23.799Standard elementyellow/black60087075
279.29.848Angle element leftyellow/black600500/20075
279.26.562Angle element rightyellow/black6007575
279.24.3113 Channel Cross Over Sectionyellow/black74059775
279.20.233End element with grooveblack60022075
279.22.899End element with tabblack60023075

Cable and Hose protectors – Small

small cable protector ramp

The smaller Cable/Hose Protection Ramps provide protection to cables and hoses from damage by vehicles and pedestrians. Designed to withstand passenger and HGV traffic, but not suitable for high point load traffic.

Withstands a maximum axle load of 8 tonnes.
Manufactured from a special vulcanised rubber compound, complete with a yellow high-quality polypropylene hinged lid featuring an anti-slip surface, enabling easy top loading of cables/hoses.
Each element has interlocking tabs, and can be permanently fixed via moulded in anchor bolt recesses. (Anchor bolts supplied separately).
Ideal for use in construction sites, distribution depots, emergency works, road works etc.
Specification: 

Size:
  • Centre section: 930 mm L x 500 mm B x 50 mm H
  • Channels: 5 each 38 mm W x 35 mm H
  • Material – Body: Hard rubber
  • Material – Cover: Polypropylene
Colour: Body-Black, Cover-Yellow
Note: Length shown is overall and includes fixing lugs. Net length is 900 mm.
small hose protector being carried
We recommend that appropriate warning signs are used with this product.
  • Recommended speed 5mph.
  • Easily and quickly deployed
  • 5 top loading channels for cables/hoses
  • Interlocking design feature
  • With protective lid and carrying handle
  • Suitable for traffic up to HGV’s (Max. Axle load 8t)

Small Cable Ramp: Choose your version/model

The table below shows you the available versions and models of product Small Cable Ramp so that you can choose the product that best matches your needs.
small hose ramp schematic

CodeDesignWidth

(mm)

Length in travel

direction (mm)

Drive-over

height (mm)

Colour
279.29.623Centre Section930 (net length 900)59050yellow/black
279.23.599Angled Section Left57059050yellow/black
279.24.283Angled Section Right57059050yellow/black
279.28.531End Section – Male19059050black
279.21.828End Section – Female19059050black

Wheelchair ramps for cable and hoses

Wheelchair ramp for cables and hoses

Sturdy wheelchair ramps moulded in recycled rubber, for easy and quick installation on a 2-channel, 3-channel and 5-channel cable/hose ramps. Enables wheelchair users to cross cable bridges comfortably and safely. The anti-slip surface and profile of the wheelchair ramp guarantees reliable grip. Cables and hoses are fully protected.
The ramps also make cable/hose ramps easily crossable for wheeled walkers, prams, carts, etc.  Load capacity 200 kg.
An essential accessory for organisers of festivals, events or any other situations where hoses/cables are protected by hose/cable ramps.
  • Simply install anywhere along the cable/hose ramp run
  • No fixings required: simply place the elements along the long edges of the cable bridge.
  • With anti-slip surface
  • Carrying handles incorporated
  • The cable/hose ramp cover can still be opened.
  • 880 mm wide for extra safety and comfort.
Each kit includes 2 ramps.
wheelchair ramp for hoses open
Specification:
Dimensions (1 ramp):
744 x 440 x 75 mm
Colour: Blue
Material: Recycled plastic
Weight: 8 kg
The wheelchair ramps are not designed to carry motor vehicles.
wheelchair ramp dimensions
CodeLength in travel
direction (mm)
Width

(mm)

Drive-over

height(mm)

ColourWeight
(kg)
279.25.942744880 (kit)75blue17.00

Please find the Traffic-line product brochure for the cable and hose protector ramps here.