External Drum Storage Units designed for the prevention of environmental pollution and hazardous situations occurring by way of accidental spills. Constructed from mild steel sheet with a fully welded leakproof sump over the entire base area. We show the 4 and 96 drum models, but please contact Merlin in if you need a capacity in-between these two.

Drum Store – DS1P

drum store ds1p

A pressed steel welded-body construction provides the structural strength for this unit, while the roof which is fitted with lifting eyes is manufactured from mild steel. The two hinged doors are constructed from mild steel and are fitted with a rod and lock and a keyed handle.

Constructed from mild steel, the sump is fully seam welded and fitted with pallet support beams onto which the pallet sits directly. The sump as you would expect complies fully with all current UK regulations relating to sump capacities, and the underside is fitted with plinths to eliminate contact with ground and reduce the risk of corrosion. Before painting, the unit is fully shot blasted to provide a clean and keyed surface.

This model can hold up to 4 x 205ltr drums (1 pallet location) and will accommodate standard 1200 mm x 1200 mm, 1200 mm x 1000 mm and 1200 mm x 800 mm pallets.

Chargeable Options:

  • Air vents
  • Galvanised steel grid mesh
  • Galvanised steel pallet channels

Please notify us at the time of ordering if you require any of these options.

Notes:

This unit will be delivered by an HGV, possibly articulated, therefore please ensure that a vehicle of this type can access your premises before ordering and advise us accordingly.

You will require an appropriate size/capacity fork lift truck to offload this item from the delivery vehicle. Our standard delivery doesn’t include any offloading, but we do offer a chargeable HIAB service, which means the unit can be offloaded in any location that the HIAB vehicle can stand adjacent to.

The unit must be positioned on a solid level surface, ideally concrete of circa 150 mm in depth and 100 mm bigger overall than the unit. The purpose of this is to ensure the unit does not settle unevenly when loaded.

External size:1450 mm L x 1489 mm W x 1495 mm H at the highest point on the unit
Internal clear space:1375 mm W x 1370 mm D x 1250 mm H
Number of containers: 4 x 205 litres – vertical
Sump capacity:240ltr
Colour: Green RAL 6029
Tare weight:400 kg
Type of doors: 2 hinged
Type of door lock: Rod & lever with keyed handle
Access aperture: 1320 mm W x 1190 mm H
Paint specification: A high build, quick drying primer/topcoat paint specifically designed for use directly on to metal or bare steel, this paint contains zinc phosphate anti-corrosive pigments and is applied with a minimum dry film thickness of 75 microns.

Drum & IBC Store – DPU96-24 PB

To Hold 96 Drums or 24 IBC Tanks

96 steel drums external store

Backed by our 20-year structural guarantee*

The base of this unit is manufactured from mild steel sheet and uses RHS cross members and pressed ribs for additional strength. All the corner posts and shelves, main rails and cross members are manufactured from rolled hollow section and the back, sides and door panels are pressed from mild steel sheet which is corrugated where required.

Constructed from mild steel, the sump is fully seam welded and fitted with a **pushback loading system, which consists of a “sliding rail” device that allows the pallets to be pushed to the back of the unit and the front pallet used to control the movement of the back one. The sump as you would expect complies fully with all current UK regulations relating to sump capacities, and the underside is fitted with plinths to eliminate contact with ground and reduce the risk of corrosion. Pallets on the upper level are also loaded on to a pushback loading system and before painting the unit is fully shot blasted to provide a clean and keyed surface.

This model can hold up to 96 x 205ltr drums or 24 x 1000ltr IBC’s across two levels and will accommodate standard 1200 mm x 1200 mm, 1200 mm x 1000 mm and 1200 mm x 800 mm pallets.

*Full details available on request

Chargeable Option:

  • Air vents

Please notify us at the time of ordering if you require this option.

This unit will be delivered by an HGV, possibly articulated, therefore please ensure that a vehicle of this type can access your premises before ordering and advise us accordingly.

You will require an appropriate size/capacity fork lift truck to offload this item from the delivery vehicle. Our standard delivery doesn’t include any offloading.

The unit must be positioned on a solid level surface, ideally concrete of circa 150 mm in depth and 100 mm bigger overall than the unit. The purpose of this is to ensure the unit does not settle unevenly when loaded.

External size:8840 mm L x 2800 mm W x 3660 mm H at the highest point of the unit
Lower level clear space: 1495 mm H
Upper level clear space: 1540 mm H
Capacity: 96 x 205 litres or 24 x 1000 litres IBC’s
Sump capacity: 6100 litres
Colour: Green RAL 6029
Tare weight: 4400 kg
Type of doors: 3 sliding
Type of door lock: Padlock points (Padlocks not supplied) & keyed locks
Access apertures: 2810 mm W x 3130 mm H (x2) & 2840 mm W x 3130 mm H (x1)
Paint specification:A high build, quick drying primer/topcoat paint specifically designed for use directly on to metal or bare steel, this paint contains zinc phosphate anti-corrosive pigments and is applied with a minimum dry film thickness of 75 microns.