Gate castors are a specialist system designed to help take out the variation in ground heights and are mostly used on large gates travelling over uneven ground. The maximum height difference is 75 mm or 3 inches with a weight on the castor of no more than 70 kg.
The Gate Castor has a nominal weight loading capacity of 70 kg and is designed to support the gate over its travel. Ideally fitted onto a new gate it will help stop the hinges wearing over time. Some customers fit a wear plate into the driveway so that the rubber tyre runs more smoothly.
BZGC CASTORS SERIES
Specially designed castors to help support the ends of wide gates. Fabricated steel housing with black finish.
Available with plate fixing. For wheel options please download the pdf below. Please Note: Casters are not available with pneumatic wheels.
WHEEL DIAMETER RANGE: 100 mm
LOAD CAPACITY RANGE: 75 kg
For full details, including dimensions and part numbers, please open or download the PDF
Fabricated fixed sprung loaded gate castor with a side mounted plate fixing. Fitted with a black elastic rubber tyre on cast iron centre wheel with ball bearings. Wheel diameter 100 mm, tread width 38 mm, Overall height 375 mm, Fixing Hole M8 drilled on 85 mm centres.
Load capacity 75 kg. Spring compression starts at 20 kg
|Wheel Dia (mm)||100|
|Wheel Material||Black Elastic Rubber on Cast Iron|
To help you find the right gate castor for you, the first numbers in the product codes, such as BZGCF100CRBJ shown below, is the wheel diameter which, in this case, is 105 mm. Please contact Merlin Industrial for more technical help or to check on the availability of a particular model.
Gate Castors available to buy online.